Furnace Combustion Blower

NISCO Plastic and Fiberglass Blowers and Fans

NISCO Fan Co. develops wide range of plastic and fiberglass fans and blowers for industry applications where aggressive media must be moved. Plastic fans include polypropelene, PVC, PVDF, fire retardant and UV resistant PPs.

Applications for Corrosion and Chemical Resistant Fans include:

* University, Medical Research, Defence Labs, Fume Hoods OEMs, Pharmaceutical Labs
 
  On most campuses there is a certain number of fume hoods that are used for various acids testing to break down materials for analysis. HCl and Perchloric Acid are the ones used most commonly. Fume hoods and Chemical resistant fans are needed.

* High Technology Semiconductors, PCBs, and Photonics

  Chip makers use acids to clean metal before they mount thin film on the metal upon which they lay circuitry.

* Printed Circuit Board Industry

  FRP fans are frequenly used for clean rooms.

* Waste water and Sewage Treatment Plants

  Hydrogen Sulfide builds up (H2S) in sewage plant facilities and causes an odor problem that has to be treated. Depending on the size of these stations corrosion resistant fans are needed. This gas can also be very volatile and will require explosion proof motor and static grounding of the fan housing by graphite impregnation that NISCO can provide too.

* Salt Air and High Humidity Environments

  Any facility near the salt air is also a good place for plastic fans and the humidity will eat through metal fans.

* Steel and Wire Manufacturing

  As the steel comes in and sits at these plants impurities and scale develop on the steel or the wire that needs to be cleaned off before the wire or steel can be properly worked with. Acid baths are needed for this and the corrosive fumes coming off these aced baths are highly corrosive...

* Stainless Steel and other Metal Production Facilities

  In tha annealing and Pickling process acid baths are used to strip scale off the steel after the annealing process that smoothed out grain patterns that may have formed during the annealing process. Later on acids are used again to support oxidation.

* Chemical and Petrochemical Industries

* Jet Engine and Power Plant Turbine Manufacturing or Servicing

  Molted Salt tanks are often used here to descale metals coming out of hot furnaces. Pickling and cleaning of titanium which is used in Jet engine parts also utilize acid baths as does nickel plating.

* Electroplating and Metal Finishing

  These industries use fiberglass fans and fume scrubbers.

* Scrubber OEMs and Designers
 
  FRP fans are standard components in fiberglass srubber designs.

* Industrial Galvanizers

* Printing Press Service Shops

* Chromatography

* Food Processing

  Often in the food processing industry they wash equipment down with acids and other corrosives. Also they use fans for the humidity that builds up from the drying process of foods.

* Pulp and Paper Industry

  Pulp and paper manufacturers are very wide users of fiberglass and other plastics fans for their boilers, exhaust and filtration systems.

NISCO fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. NISCO fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.

High-efficiency impellers result in low power consumption, operating costs, and quieter operation. All metal hardware is completely sealed from exposure to corrosion by incapsulating into FRP or plastic; the steel support frame and motor base are powder coated with a corrosion-resistant finish. In addition to being highly resistant to chemical corrosion, PP fans are self-extinguishing and will not support combustion.

NISCO fiberglass fans housings are manufactured from premium grade, fire resistant resins that provide excellent corrosion resistance in most chemical environments. NISCO FRP impellers are made of premium vinyester that combines corrosion resistance with structural integrity under the stress of rotation.

Tough applications mean tough fans and blowers by NISCO. NISCO Fan Co. is a world wide distributor of industrial process ans OEM fans and blowers, as well as fan / blower components; including high pressure blowers, high temperature fans, spark resistant and explosion proof ventilators, tubeaxial and vaneaxial high pressure ventilators. Canada Blower also does existing fans and blowers repairs, re-build, as well as dynamical wheels balancing.

For additional information please refer to http://nisco.net/fanblower.html.

Oleg Tchechel
Industrial Process Engineer
NISCO Fan Co.
http://nisco.net/custserv.html
http://nisco.net/heatexchange.html

About the Author

Oleg Tchechel
Developer of Industrial Ventilation Equipment
NISCO Fan Co.

http://www.nisco.net/custserv.html

http://www.nisco.net/inquiry.html

Furnace $10.49 Furnace

1600EF Outdoor Furnace Single Blower 180 000BTU No $2799 The 1600EF Exterior Furnace is designed to use in conjunction with your existing HVAC ductwork and work seamlessly with your existing furnace while leaving the mess to the great outdoors With up to 180000 btursquos it is designed to heat a home up to...

Combustion $4.49 Combustion

HYC Fire Chief FC500E Indoor Wood Burning Furnace $2802.82 This Fire Chief FC500E addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. Works with existing furnaces and HVAC duct work to heat up to 2000 square feet. Easily connects to existing duct work. PreWired Electrical System Fully automatic components are prewired for your convenience and will reduce electrical installation time and expense. Thermostatically controlled draft adds convenience and comfort determined by the temperature setting of your Fire Chief wall thermostat. 3Speed Blower Motor Allows for gentle circulation of air when heating requirements are low and high. Secondary Combustion Chamber Increases fuel efficiency while reburning smoke and wood gases before they are vented up the chimney. Cold Air Return/Filter Box Standard equipment on the FC500E Indoor Wood Burning Furnace by Fire Chief. This box filters the system air as well as connecting a cold air return duct necessary for good installation. Cast Iron Baffle Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. Lifetime Warranty. Cast Iron Roller Grates Designed to roll 360 degrees from either direction allowing fine ash to drop into ash pit and leaving hot coals in fire box. Lifetime Warranty. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Removable Ash Pan For safe cleaning and convenience. Model FC500E Furnace Specifications:. Height: 50.5 . Width: 26 . Depth: 26 . Maximum Heating Capacity: 1500 2000 sq ft. Maximum Btu Output: 100 000 approx. Maximum Log Size: 22 . Flue Size: 6 . Fire Chamber Volume: 5.00 cu ft. Plenum Size: 12 Round. Door Size: 13 X 14 . Height to Center of Flue collar: 44.5 . 3Speed Blower Capacity: 1150 1500 1800 cfm. Blower Power Supply (Volts Amps): 110 20. Warranty Firebox: 5 Year. WarrantyGrates Castings: Lifetime. Optional Accessories for the FC500 Fire Chief Furnace:. AMBD12 12 Back

HYC Fire Chief FC1100E Indoor Wood Burning Furnace $3782.9 This Fire Chief FC1100E addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. Works with existing furnaces and HVAC duct work to heat up to 5000 square feet. Easily connects to existing duct work. PreWired Electrical System Fully automatic components are prewired for your convenience and will reduce electrical installation time and expense. Thermostatically controlled draft adds convenience and comfort determined by the temperature setting of your Fire Chief wall thermostat. 3Speed Blower Motor Allows for gentle circulation of air when heating requirements are low and high. Secondary Combustion Chamber Increases fuel efficiency while reburning smoke and wood gases before they are vented up the chimney. Cold Air Return/Filter Box Standard equipment on the FC1100E Indoor Wood Burning Furnace by Fire Chief. This box filters the system air as well as connecting a cold air return duct necessary for good installation. Cast Iron Baffle Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. Lifetime Warranty. Cast Iron Roller Grates Designed to roll 360 degrees from either direction allowing fine ash to drop into ash pit and leaving hot coals in fire box. Lifetime Warranty. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Removable Ash Pan For safe cleaning and convenience. Furnace Specifications. Height: 50.5 . Width: 26 . Depth: 39 . Maximum Heating Capacity: 5000 sq ft. Maximum Btu Output: 200 000 approx. Maximum Log Size: 34 . Flue Size: 8 . Fire Chamber Volume: 11.00 cu ft. Plenum Size: 12 Round. Door Size: 13 X 14 . Height to Center of Flue collar: 44.5 . 3Speed Blower Capacity: 1150 1500 1800 cfm. Blower Power Supply (Volts Amps): 110 20. Warranty Firebox: 5 Year. WarrantyGrates Castings: Lifetime. Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:. AMBD12 12 Ba

HYC Fire Chief FC700E Indoor Wood Burning Furnace $3306.68 This Fire Chief FC700E addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. Works with existing furnaces and HVAC duct work to heat up to 3500 square feet. Easily connects to existing duct work. PreWired Electrical System Fully automatic components are prewired for your convenience and will reduce electrical installation time and expense. Thermostatically controlled draft adds convenience and comfort determined by the temperature setting of your Fire Chief wall thermostat. 3Speed Blower Motor Allows for gentle circulation of air when heating requirements are low and high. Secondary Combustion Chamber Increases fuel efficiency while reburning smoke and wood gases before they are vented up the chimney. Cold Air Return/Filter Box Standard equipment on the FC700E Indoor Wood Burning Furnace by Fire Chief. This box filters the system air as well as connecting a cold air return duct necessary for good installation. Cast Iron Baffle Directs the combustion air flow below and above the cast iron grates creating the maximum fire temperature for every pound of fuel. Lifetime Warranty. Cast Iron Roller Grates Designed to roll 360 degrees from either direction allowing fine ash to drop into ash pit and leaving hot coals in fire box. Lifetime Warranty. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Removable Ash Pan For safe cleaning and convenience. Furnace Specifications. Height: 50.5 . Width: 26 . Depth: 31 . Maximum Heating Capacity: 2500 3500 sq ft. Maximum Btu Output: 150 000 approx. Maximum Log Size: 28 . Flue Size: 6 . Fire Chamber Volume: 7.00 cu ft. Plenum Size: 12 Round. Door Size: 13 X 14 . Height to Center of Flue collar: 44.5 . 3Speed Blower Capacity: 1150 1500 1800 cfm. Blower Power Supply (Volts Amps): 110 20. Warranty Firebox: 5 Year. WarrantyGrates Castings: Lifetime. Optional Accessories for Fire Chief FC700 Heating System:. AMBD12 12 Back Draft Dampe

HYC Fire Chief FCOS2200D Outdoor Wood Burning Forced Air Furnace $5022.81 This Fire Chief FCOS2200D addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. Quality outdoor wood burning forced air furnace engineered to exceed the heating requirements of the larger size home in even the coldest winter months. Works with existing furnaces and HVAC duct work to heat up to 3500 square feet. Easily connects to existing duct work. Automatic Heat Dump Door PATENT PENDINGSafely releases heat off the unit in the event of power failure. Secondary Combustion ChamberIncreases fuel efficiency while reburning smoke and wood gases before they are vented up the chimney resulting in a cleaner burn. PreWired Electrical System Fully automatic components are prewired for your convenience and to reduce electrical installation time and expense. Thermostatically controlled Draft SystemEasily adjusts the temperature setting in your home with the wall thermostat (included with your furnace) and enjoy the warmth throughout your home. Thermostatically controlled 1800 CFM blowerDelivers a more consistent heat in the home. High Temp Insulation. Deep Firebox (Holds 32 Log). Slide ByPass DamperMakes cleaning flue easier and aids in quick fire startup. Cabinet has a durable weatherresistant baked on powder coated enamel finish. Ash Drawer with Draft Damper. Cast Iron Fuel Door. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Specifications. Height: 59 . Width: 30 . Depthincludes Filter Box: 65 . Maximum Heating Capacity: 3500 sq ft. Maximum Btu Output: 160 000 approx. Maximum Log Size: 32 . Flue Size: 6 . Fire Chamber Volume: 11.00 cu ft. Hot Air Plenum Size: 10 Round. Cold Air Return: 12 Round. Door Size: 13 X 14 . Blower Capacity: 1800 cfm. Blower Power Supply (Volts Amps): 110 20. Warranty Firebox: 5 Years. WarrantyGrates Castings: 5 Years. WarrantyElectrical Components: 1 Year. Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:. AMBD10 1

HYC Fire Chief FCOS1600 Outdoor Wood Burning Forced Air Furnace $3097.4 This Fire Chief FCOS1600 addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. The FCOS1600 comes standard with a round firebox. This creates a strong fire chamber and also increases the surface area for greater heat transfer. Works with existing furnaces and HVAC duct work to heat up to 1800 square feet. Easily connects to existing duct work. Automatic Heat Dump Door PATENT PENDINGSafely releases heat off the unit in the event of power failure. Secondary Combustion ChamberIncreases fuel efficiency while reburning smoke and wood gases before they are vented up the chimney resulting in a cleaner burn. PreWired Electrical System Fully automatic components are prewired for your convenience and to reduce electrical installation time and expense. Thermostatically controlled 1800 CFM blowerDelivers a more consistent heat in the home. Manual Draft ControlEasily adjusts the temperature setting in your home with the cast iron door mounted spin draft controls. Laser Cut Ash SlotsAllow fine ash to drop into Ash Pan leaving hot coals in the firebox. High Temp Insulation. Deep Firebox (Holds 28 Log). Slide ByPass DamperMakes cleaning flue easier and aids in quick fire startup. Cabinet has a durable weatherresistant baked on powder coated enamel finish. Ash Drawer with Draft Damper. Cast Iron Fuel Door. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Specifications. Height: 44.5 . Width: 29.5 . Depthincludes Filter Box: 60 . Log Size: 28 . Fire Chamber Volume: 6 Cu. Ft. BTUs Maximum: 100 000. Heating Capacity: 1 800 sq. ft. Door Size: 13 x 14 . Blower Capacity: 1800 cfm. Blower Power Supply (Volts Amps): 110 20. Warranty Fire Box: 5 year limited. Warranty Electrical Components: 1 year. Hot Air Plenum: 10 round. Cold Air Return: 12 round. Optional Accessories for the Fire Chief FC1100 Wood Furnace Heating System:. AMBD10 10 Back Draft Damper (Supply Air). AMBD12 12 Back

Advanced Pulverized Coal Injection Technology and Blast Furnace Operation $97.95 In order to reduce the cost of running blast furnaces (BFs), injected pulverized coal is used rather than coke to fire BFs. As a result of this, unburned fine materials are blown with the gas into the bosh and dead man areas with possible detrimental effects on gas flow and permeability of the coke column. The capacity of the furnace to consume these particles by solution loss is probably one of the limitations to coal injection. It is, therefore, important to understand the physicochemical and aerodynamic behaviour of fines including the change of in-furnace phenomena. The Committee of Pulverized Coal Combustion and In-Furnace Reaction in BF was set up in 1993 as a cooperative research of the Japan Society for the Promotion of Science (JSPS) and the Iron and Steel Institute (ISIJ) to evaluate research initiative into this problem. This book reports on the JSPS/ISIJ Committee's activities and describes the interpretation of findings drawn from combustion experiments and the results of live furnace applications, and furnace performance.

Animal Furnace $8.99 Animal Furnace

Daniel in the Furnace $39.99 Daniel in the Furnace - Giclee Print

Reverberatory Furnace $24.99 Reverberatory Furnace - Photographic Print

Spontaneous Combustion $8.99 Spontaneous Combustion

Applied Combustion $139.95 Applied Combustion

Combustion Phenomena $149.95 Combustion Phenomena

The Furnace $22.42 No Synopsis Available

In the Fiery Furnace $34.99 James Tissot In the Fiery Furnace - Giclee Print

The Fiery Furnace $34.99 Clive Uptton The Fiery Furnace - Giclee Print

Into the Fiery Furnace $34.99 C.l. Doughty Into the Fiery Furnace - Giclee Print

Furnace Room Lullaby $8.99 Furnace Room Lullaby

The Mars Volta Combustion Sticker $4.99 COMBUSTION - STICKER

HYC Fire Chief FC300F Indoor Wood Burning Furnace $1492.63 This Fire Chief FC300F addon furnace combines exceptional quality at an affordable price. MADE IN THE USA. Works with existing furnaces and HVAC duct work to heat up to 1200 square feet. Easily connects to existing duct work. PreWired Electrical System Fully automatic components are prewired for your convenience and will reduce electrical installation time and expense. Thermostatically controlled blower with optional filter box delivers warm air while reducing the cost of heating your home. High Grade heavy (7 10) gauge steel is continuously welded for maximum structural strength. Removable Ash Pan for safe cleaning and convenience. Heavyduty Cast Iron Grate allows fine ash to drop into ash pan and leave the hot coals in the firebox. Furnace Specifications. Height: 40.5 . Width: 20 . Depth: 24 . Maximum Heating Capacity: 1200 sq ft. Maximum Btu s: 80 000. Maximum Log Size: 22 . Flue Size: 6 . Fire Chamber Volume: 4.00 cu ft. Plenum Size: 8 round. Door Size: 13 X 14 . Height to Center of Flue collar: 35.25 . Blower Capacity: 500 cfm. Blower Power Supply (Volts Amps): 110 20. WarrantyFirebox: 5 year limited. WarrantyGrates Castings: 5 year limited. Optional Accessories for the FC300 Fire Chief Furnace:. FCFB300 Filter Box for FC300F (requires 16 x 20 x 1 filter). AMBD8 8 Back Draft Damper. TB24S Hot Water Coil with Hole Saw. The BTU ranges and heating capacity Specifications are provided as guidelines only and in no way guarantee the output or capacity of the unit. The actual BTU output depends on the type of fuel being burned and its condition the draft adjustment and the chimney that the unit is hooked up to. The actual area that the unit will heat depends on factors such as the condition of the building heat loss type of construction amount of insulation type of air movement and location of the unit.

Pelonis ClassicCeramic Furnace $91.99 Pelonis Ceramic 4-disc furnace heater

1873 Smoke-Burning Furnace - Original U.S. Patent #141,574 $1345 "Own this original, one-of-a-kind piece of 19th century American history, made available by the U.S. Patent Model Foundation, exclusively through The Times.A problem with boiler-furnaces is the release of unconsumed fuel, so Cornelius McGinniss and William Naylor, both of Chicago, tackled this problem. To a standard steam-boiler furnace, they devised a special arrangement, using deflectors, by which a great amount of the products of first combustion are reburned. In ordinary sized fire-boxes, nearly all the smoke is reburned; in larger units, more deflectors can be employed to secure a perfect combustion. This is a made of tin, which has been faux-painted bright red and white to look like a brick furnace, with tiny doors and the like in black. This rustic painting has worn, faded and chipped over time, now giving this folksy model it a mellow appearance and the kind of character that makes it a standout in any display. Presented to the U.S. Patent Office by its hopeful inventor, this is the actual model that examiners relied upon to award this patent more than 130 years ago. For more images of this invention, from different angles, click here. All U.S. Patent models are from 1836 to the 1890�s, and are approximately 12 or less inches square. Each of these rare artifacts is guaranteed authentic. As with any historical items from the 1800�s, signs of age and wear are common and are considered part of a model�s charm. Each model comes with its original patent office tag or a replica tag, plus a copy of its patent drawings and papers printed on parchment and a certificate of authenticity with a fascinating background on patent model history.Comes with FREE Inventing America booklet, featuring Times coverage of inventors and innovators dating back to the newspaper's inception in 1851! For more history into the U.S. Patent's Office, click here.Ships in 5 � 7 days."

Combustion Noise $159 Exploring the noise generation by combustion, this book offers an insight into combustion noise and the underlying physical processes combining experiments and simulations.

This entry was posted on Wednesday, July 22nd, 2009 at 10:29 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.